
Would you like to go diving or snorkeling with the GoPro Hero 9 - 13 ? We recommend using the aluminum T-housing as an underwater housing for your Gopro. The underwater housing is small, sturdy and is equipped with stainless steel buttons. The maximum depth is 250 meters! This underwater housing is a lot firmer than the standard protective housing from GoPro. Each housing is machined from one aluminum block and fully assembled and tested in Germany. The T-HOUSING is designed to use your GoPro HERO 9 camera with the front lens on. This makes the camera twice as safe against water damage.
100% fog-free
A fogged port of your underwater housing is very annoying. This T-housing is known for good heat dissipation. The heat that the camera produces is optimally dissipated, making condensation practically impossible.
Super small
The underwater housing is very compact. The dimensions are 10.9 x 8.5 x 5.1 cm and it weighs only 360 grams. The underwater housing has an eye for attaching a spiral cord. This way you can attach the underwater housing to your BCD or to your wrist.

At the bottom, the housing is equipped with two 1/4 "tripod connections. A Gopro mounting adapter is optionally available to mount this house on top of, for example, the GoPro mount of a surfboard, underwater drone or other underwater housing
Magnetic filter and macro system available
For this T-housing is an (optional) magnetic filter and macro system available. The filter system works with magnets and is available in 3 colors: red, magenta and yellow. The yellow filter is used for fluorescence effects with a special lamp.
The macro system consists of an adapter with 67mm screw thread, which you place on the underwater housing by means of the magnets and a +10 diopter macro lens to fit on it. Any other filter / lens with a 67mm screw thread can be placed also.

If you are not using the filter or the macro lens during the dive, you can place it on the optional parking station with the magnets. You can attach the parking station witk the supplied tripod screw on a hole in a tray, that you place under the underwater housing.
Wide-angle lens on your GoPro Hero 9 - 13
With the special T-housing adapter, you can easily attach a wide-angle lens (the AOI UWL-03) to your GoPro for underwater video. This lens provides an impressive field of view of 140° underwater and 150° above water! The lens comes with a neoprene dome protective cover and a rear lens cap.
Underwater lighting for your Gopro
If you are diving or snorkeling with your GoPro in the Netherlands, Belgium or other non-tropical waters, you will soon find out: you need lighting with your GoPro to be able to make beautiful colorful images. In our waters you simply lack light to make beautiful colorful images. But you can also achieve much better results in tropical places with additional lighting. A while ago we wrote an extensive article about it and we discussed different lamp sets. We explained that you get nicer colors and contrasts when you use a video light. We have discussed how many lumens your video light should be and whether it is best to use 1 or 2 video lights. Read that article here.
Also available in the H10 POWER version for extended recording time
This underwater housing is specifically designed to use the GoPro HERO 9-13 in combination with the Digipower Re-Fuel battery pack from GoPro, allowing for longer continuous recording time. The GoPro fits into this special version of the housing with the larger battery.
Set Gopro Hero 13 with aluminum T-Housing
The GoPro Hero 13 is available as a set with the corresponding underwater housing T-Housing. The T-housing is also available separately and we keep it in stock continuously. Most accessories are also available directly from stock. Current stock and price information can always be found at the relevant products in our webshop.
Link to our webshop for current stock and price information
We offer a wide range of waterproof cases for all kind of cameras. Here you’ll find all waterproof underwater housings listed.



















