Ikelite DL5 DS Link Canon TTL Converter with Ikelite ICS-5

• Faster, more accurate, and more reliable than fiber optic TTL triggers
• Always ready when you are - no batteries required
• Switch between TTL and manual exposure with the press of a button
• Supports flash exposure (EV) compensation set in the camera
• Supports rear curtain sync
• Improves strobe battery life and recycle time
• One TTL converter supports a wide selection of camera models
• Independently waterproof sealed

Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.

The included CT1 Canon TTL Hotshoe and B1A Bulkhead are necessary for TTL operation with select Ikelite DLM housings. See Housing Compatibility information below.

The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL5 DS Link fully supports rear curtain sync flash modes.

The DL5 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL5 DS Link converter.

Housing Compatibility
Ikelite 200DLM/A Housing for Canon EOS M6 Mark II # 6973.07
Non-Ikelite housings for Canon mirrorless cameras featuring 1/2" through or 1/2-20 threaded accessory port
Camera Compatibility
Canon EOS 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R
Canon EOS 6D, 6D Mark II
Canon EOS 7D, 7D Mark II
Canon EOS 70D
Canon EOS 750D Rebel T6i, Kiss X8i
Canon EOS 77D, 9000D
Canon EOS 7D, 7D Mark II
Canon EOS 800D Rebel T7i, Kiss X9i
Canon EOS 80D
Canon EOS 90D
Canon EOS R, RP
Canon EOS M6 Mark II


Strobe Compatibility
DS50 strobes: above serial number 75510 with update
DS51 strobes: above serial number 78700
DS125 strobes: above serial number 7928
DS160, DS161 strobes: all
DS200 strobes: above serial number 7163
Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
Not compatible with SEA&SEA, INON, or other non-Ikelite strobes


Sync Cord Compatibility
Ikelite Housing to Ikelite Strobes # 45151
Ikelite Housing to Two Ikelite Strobes # 45152
Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)