Ikelite 200DL housing Canon EOS 750D Mark II #71718

This underwaterhousing features the Dry Lock (DL) port system. O-ring placement is outside of the port mount with this system. This improves the visibility and reduces the changes of water dropping in to the housing. DL ports are also the lightest on the market. Most popular lenses can be used. Click here for the list with compatible lenses and the port chart.

Vacuum system
The included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge #47011

TTL Exposure
This housing supports your choice of shooting manual strobes or adding TTL electronics. You can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit #46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. 

Controls 
Shutter and AE/FE Lock levers stand out with super sensitive and natural feeling curved levers. Both controls can be extended using the optional Trigger Extension #4077.93 for more comfortable use when using a right-hand quick release handle. 

All push button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.

The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.

Viewfinders
The included Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 2) #6891.2. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.

Specifications

200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for Diopter Adjustment Control or Flash button
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.8 lb (2.2 kg)
9.2 x 7.1 x 6.6" (234 x 180 x 168 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC construction is fundamentally corrosion-resistant

In the box

Housing
Rear O-ring # 0132.59 (installed)
Front O-ring # 0132.45 (installed)
Zoom Gear Retainer # 75900 (installed)
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Base with Left-Hand Quick Release Handle # 4077.67 (installed)
Tool for Zoom Gear Retainer # 0945.06
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc tube