Isotta underwater housing for Nikon Z6 III

Usable commands from outside:

-ON/OFF lever for the Nikon Z 6III;
-Ergonomic focus and shutter lever, easy to operate even with gloves;
-Lens release lever;
-Zoom dial;
-Port safety lever;
-Fn1 button lever;
-Fn2 button lever;
-Movie record button lever (REC);
-AF-ON button lever;
-Photo/Video selector lever;
-Monitor mode selection lever;
-Mode dial;
-Main command dial;
-Sub-command dial;
-Exposure compensation button;
-ISO button;
-Delete button;
-Playback button;
-Release mode button;
-AE-L button;
-Multi-selector joystick;
-OK button;
-MENU button;
-i button;
-DISP button;
-Thumbnail playback / focus point selection button;
-Zoom-in button.

Technical data of the Isotta underwater housing for Nikon Z6III:

• Red anodized aluminum body;

• Ergonomic, adjustable side handles (via optional accessory);

• Two standard fiber-optic connections (flash use requires an optional trigger);

• Three M16 holes and one M24 hole for accessories such as vacuum systems, monitors, Nikonos or S6 bulkheads;

• Back housing fully detachable from the front housing;

• Tray with locking system for easy camera insertion;

• Single-hand closing knob for the back housing;

• Aluminum buttons and dials with engraved symbols, identical to the camera controls;

• Wide rear display viewfinder glass;

• Standard ISOTTA viewfinder;

• Double O-ring seals on all buttons and removable parts;

• Moisture sensor with LED indicator (replaceable battery);

• Removable B120 bayonet port;

• Safety lock on the port to prevent accidental opening;

• Wide, rubber-covered feet for stable positioning on boat decks or the seabed;

• M8 hole on the upper side of the housing for accessories such as focus lights;

• Two M6 holes on the bottom of the housing for accessories such as strobe or tripod brackets;

• Prepared for ISOTTA vacuum system (not included);

• External viewfinders supported; compatible with ISOTTA and INON X-2;

• Maximum operating depth: 100 meters;

• Weight: 2,700 g;

• Dimensions (L × H × D): 292 × 186 × 138 mm.

This housing comes with:
Front cap;
Handles;
Standard ISOTTA viewfinder;
Humidity sensor;
Fiber optic connection bulkhead (to use the flash needs an optional trigger);
Replacement O-ring kit;
Silicone lubricant 15gr / 0,5 oz;