Ikelite Sony Alpha A1 II Deluxe Underwater Housing 71483-DLX

A full featured and durable waterproof housing for Sony a1 II and a9 III full-frame mirrorless digital cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water. This DELUXE version is set up exactly the way we would use it with Dual Tray with Dual Handles, Trigger Extensions, Vacuum Pump, USB-C Charging & Data Transfer Bulkhead, and a set of spare O-Rings.

The housing provides full creative control over the camera. Our custom ABS-PC blend is lighter than aluminum yet strong enough for almost anything you want to throw at it. The included Vacuum Pump with Gauge allows you to check for leaks prior to entering the water. The first-of-its-kind USB-C Charging & Data Transfer Bulkhead allows you to offload photos and top off the battery without removing your camera and lens from the housing. 

"DL" LENS PORT REQUIRED (Sold Separately)
A compatible lens port is required for waterproof operation (sold separately). Choose the correct port components on the lens you will be shooting in this port chart or contact us for advice. Controls are provided for all camera functions except: Diopter adjustment, Focus mode dial; Joystick up/down/left/right (Joystick can be depressed), Control wheel; Control wheel functions may be accessed using the Front and Rear Dials. To connect a strobe to this housing, there is an Ikelite bulkhead with manual hotshoe. 

Pre-Dive Checks
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal. We recommend using the vacuumpump with gauge to pull a vacuum on the housing and check for leaks prior to entering the water.

Housing construction
Our specially formulated ABS-PC blend housing is highly durable yet significantly lighter than aluminum. The light color keeps your camera cooler when shooting in warm, sunny environments.

WiFi Transfer
Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

In the box:
200DL Underwater Housing # 71483
Right Quick Release Handle # 4077.02 (installed)
(2) Trigger Extensions # 4077.95 (installed)
USB-C Charging & Data Transfer Bulkhead # 46007 (installed)
Vacuum Pump with Gauge # 47011
Spare Rear O-ring # 0132.59
Spare Front O-ring # 0132.45