i-TURTLE SMART mobie TTL trigger for Nikon

The TURTLE is juiced up to handle 2,000 images on a single charge. And it arrives bundled with a charger that allows a full recharge within 1 hour. Full TTL mode compatible with: Sea&Sea; D1, D2, YS250 INON Z220, Z240, Z330, Ikelite (full series) and S110Alpha. Optical sync compatible with: Sea&Sea; D1, D2 and Z 240 ,Z330 S110 Alpha. It’s all up to you: switch between 1st or 2nd curtain mode for perfect rendering of motion. Also, sometimes you need flash power correction: not a problem, Turtle handles this as well. 

Easy flash setup

You can easily set Turtle to communicate with your underwater strobes: just use the DIP switch on the bottom of the device (4 options cover 6 strobe brands)

No extra battery needed

Forget the need of another extra battery: Turtle has it’s own inside it’s sleek package. All you need is a USB charger or anything with a USB port to charge it to full power, and it only takes an hour.

How does it work?

First of all you should check the space in the housing. You have to measure the distance between the connector to the adapter and order a special cable. After the products arrive you just put the controller in the hotshoe, setup that from PC software, turn it on using the main switch, setup your strobe brand using the DIP at the bottom of the controller and connect the special cable to the device.

Does the TURTLE work with any underwater housing?

Basically only the camera and strobe setup matters. If the housing has any bulkhead to control the strobe or a connector for fiber optic cable it should work properly.