Nederlands
Nauticam NA-Shinobi-H Housing for Atomos Shinobi 5.2 4K HDMI
Underwater housing for the Atomos Shinobi, one of the lightest and brightest monitors available on the market.
- Safe & easy ordering - Webshop Trustmark certified
- Fast and reliable worldwide shipping with DHL, UPS or PostNL
- Authorised service center for Nauticam, INON....
The Nauticam NA-Shinobi-H follows suit with the strong foundation Nauticam has built around previous Atomos monitor/recorder housings. The NA-Shinobi supports both the Shinobi 4K HDMI monitor and the Shinobi SDI monitor.
The Shinobi is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers.
The NA-Shinobi supports up to the NP-F970 size battery which provides approximately 4 hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing.
Access to the touchscreen controls of the Shinobi are handled via a series of buttons and a selector knob beneath the screen of the housing.
Surface cable diagram
Technical specifications:
| Dimensions | 212mm x 141mm x 115mm (W x H x D) |
| Weight in Air | ~1.67kg |
| Weight in Water | -0.18kg (with monitor and battery) |
| Depth Rating | 100m |
What's In The Box:
NA-Shinobi-H Housing
25071 HDMI 1.4 Cable (A-D) in 0.75m Length (pre-installed)
M25-M16 Step Down Adaptor (pre-installed)
25625 M16 Vacuum Valve II (pre-installed)
Mounting Ball (pre-installed)
Monitor Hood
25033 M16 Standard HDMI Bulkhead
90137 Housing O-Ring
O-ring removal tool and lubricant
25036 HDMI (D-C) cable in 190mm length (for connection from HDMI bulkhead to camera)
25046 HDMI (D-D) cable in 200mm length (for connection from HDMI bulkhead to camera)
CR2032 battery
Allen Wrench Set
Padded Travel case
| Max. depth | 100 meters |
|---|